banner

G3020-500ML Nucleic Acid Eliminate Reagent for Lab DNA/RNA Degradation kit

  • Home/
  • Products/
  • In Vitro Diagnostics and Life Sciences/
  • Reagent/
  • Nucleic Acid Preservation & Remover/
  • G3020-500ML Nucleic Acid Eliminate Reagent for Lab DNA/RNA Degradation kit
Back To Product

G3020-500ML Nucleic Acid Eliminate Reagent for Lab DNA/RNA Degradation kit

The nucleic acid remover is composed of two solutions, solution A and solution B, which are non-toxic when used alone. After the two solutions are mixed in equal proportions, they have a powerful nucleic acid degradation function, which can remove high-level contaminated DNA and RNA on the surface of various objects and in the air in a short time, and can be used for the removal of nucleic acid contamination in the laboratory. It can completely degrade contaminated DNA and RNA at the level of PCR sensitivity.

Quantity

Add to cart

Share :

Package contents:

Item code Desciption G3020-250ML G3020-500ML
G3020-1 Nucleic acid remove Solution A 250mL 500mL
G3020-2 Nucleic acid remove Solution B 250mL 500mL
  Manual 1pc 1pc

 

Technical Specification

Storage and Handling Conditions

Transport at room temperature; Store at 2-8ºC sealed for 8 months.
 

Assay Protocol / Procedures

  1. Remove the reagent bottle cap and replace it with the spray head, the spray head switch can be rotated. When not in use, please adjust the top of the nozzle to "X", which means that spraying is not possible; "……"means straight spraying state; "shower icon"means spraying in multiple direction.
  2. Spray solution A on the surface of items that need to be cleaned, such as laboratory benches, biological safety cabinets, ultra-clean benches, instruments, plastic or glass containers, etc., and then spray solution B at the same position immediately, and wait 5-10 minutes. Rinse the surface with distilled water, then dry it with clean absorbent paper.
     

Note:

  1. After using this product, the nozzle should be closed to ensure that the product is kept tightly closed.
  2. This product is safe to use, non-toxic, non-corrosive and non-irritating. When spraying, do not spray directly to contact the skin, eyes and mucous membranes. If contacted, rinse with water immediately.
  3. This product can only be used in the place where the surface of the instrument and equipment can be wiped clean. After use, rinse it with distilled water and wipe it clean.
  4. For your safety and health, please wear lab coats and disposable gloves for operation.

 

For Research Use Only!

N/A
Check to receive our updates on company news and special offers on our products *